Sealing sheets for sealing joints

Sealing sheets for sealing joints

The sealing sheets are 2 to 6 m long and 15 cm wide with the metal sheet thickness of 0.7 mm (approx. 3 mm thick insulation layer). The special insulation layer is elastic and non-adhesive, made from carborundum sand. Reliably seals construction joints, separates construction grids!

MQG 150 sheet

• Sealing sheet for working joints with insulating surface to reliably seal working joints or separate working grids
• A special layer of carborundum sand ensures a perfect bond with the concrete
• In the areas of connection, MQG 150 is folded 5 cm over the ends of both sides of the sheet and backed with MQ 100 Master bentonite sealing cement. This 5 cm overlap of the sheets guarantees a perfect seal at the joint.
• In rounded areas and corners, the MQG 150 sealing sheet can simply be formed – bent as required.

Bentonite-based MQB 150 aktiv sheet

• A bentonite-based next-generation sealing sheet with insulation surface for construction joints.
• Reliably seals construction joints, separates construction grids!
• Thanks to a special layer of bentonite mixture, its joint sealing capability is extremely high.
• MQB 150 aktiv has one side (or both sides) coated with a special bentonite-based insulation layer, which is capable of expanding (increases volume by up to 300%) upon contact with water thanks to its chemical composition and thus creates safe protection against the effects of water, even pressurised water.

MQG těsnící plech se vyrábí v délkách 3-6 metrů, balení je ve svitku.

Do you need advice on sealing working joints with a sealing sheet? Contact us.

---